ok my stand for my 75

[icereefer]

Well I finally Got it done, this first photo is of the hardware I put on my doors I went with the little seahorse handles, I've used these before and like them.
first off when you screw your hinges on if you have brass screws with your hindges make sure you pre drill your hold brass is really soft and they easily will strip the heads off.

and this picture is with my sump in place.

and finally heres a pic of my 75 gal ready to go finally.

[FragOutpost]

Thanks for sharing your diy stand project. Looks like you have quite the shop there. Did you route the holes for the doors freehand or did you use a jig? Looks like a quality job!

[icereefer]

Originally Posted by FragOutpost

Thanks for sharing your diy stand project. Looks like you have quite the shop there. Did you route the holes for the doors freehand or did you use a jig? Looks like a quality job!

Freehand!